Canon 20D drivers for windows 7

[KristinaB]

My new Windows 7 laptop doesn't recognize my Canon 20D and I can't find an updated driver. Any suggestions?

 

[TheViper]

Set your communications to PTP. Win7 will then recognize it.

 

[kimba1366]

Use a memory card reader it is a lot faster.

 

[KristinaB]

Thanks TheViper, worked like a charm. KB

 

[TheViper]

Excellent, glad it's working for you.

 

[vickyk]

Set your communications to PTP. Win7 will then recognize it.

what is communication ptp is that on my camera or my computer i never had to do this ,so i don't know what that is

 

[TheViper]

what is communication ptp is that on my camera or my computer i never had to do this ,so i don't know what that is

It is one of the settings on the camera in the menu.

 

[Guest]

Thanks for this posting... it really helped me too!

Much appreciated.

 

[Guest]

Set your communications to PTP. Win7 will then recognize it.

Thanks for the tip!!! worked for me too

 

[Dollo]

Thank you. Worked for me too.

 

[vasti]

YEY!!! you are my hero!! thank you so much! so happy right now

 

[QuentinZ]

Setting the communication protocol to PTP is fine for simply downloading pictures from the camera to the computer. However I need for my application to use the remote capture to take pictures from the computer. I use the camera for some data acquisition and I need the computer to be able to control the camera.

Does anyone know how I could get this to work with windows 7? My IT manager decided to upgrade all machines to win 7 and doesn't want me to get a machine working with XP or earlier.

 

[RandomnQuestion]

Thank you Viper, the change to PtP also worked for me. May i ask though, wat does it mean, what is the difference between 'Normal' and 'PtP'?

 

[TheViper]

PTP means Picture Transfer Protocol. Technically it is a means for the camera and a printer or mass storage device to directly communicate together without a computer USB host.

Most modern operating systems will allow picture transfer to the computer under the "normal" setting but some (XP and OSX mostly) don't work quite right but work well when the camera is set to PTP instead.

 

[cindyb]

Thank you Viper! That solved my problem as well!

 

[Guest]

Set your communications to PTP. Win7 will then recognize it.

Have no idea what you mean. Just where do you go to change communications to PTP???
fordsedge@gmail.com

 

[cin19]

In your camera, go to menu> communicantion>chose the PTP (default is normal). After then connect the camera into the PC, now your PC will recognize your camera.

 

[lourendo]

i would just install eos utility. that way you can shoot tethered. meaning you can control and operate the camera while connected to usb. it is convenient for studio work. you can also use the camera normally and preview shots instantly on a real monitor with adobe bridge or preview or whatever. very useful on shots that are important.

 

[Old camera fart]

It is one of the settings on the camera in the menu.

It absolutely helped me, too - much apprciated!

 

[mparksphotos]

What if you do not have the Utility disk and you want to use your teathering cord from my camera to my conputer?