Solved! Cat 6 and 4K TV

Feb 10, 2019
3
0
10
Hi-

I am using CAT 6 wire all over my house. I have 2 Non 4k TVs that are working without an issue. My LG 4K TV constantly goes in and out. What is the best solution as the wires are inside my walls? Running an HDMI wire at this point would be very difficult. I am using the new Verizon FIOS TV One Set-top. My CAT 6 wire has an ethernet jack on the end going directly into a HDMI extender (2Pcs HDMI Repeater, HDMI to RJ45 Network Cable Extender Over by Cat 5e / 6 1080p up to 30m Extender Repeater for HDTV HDPC PS4 STB 4K 2K
by KSRplayer Limited)



Thanks
 
Unless you try different HDMI to Cat converters there is no way to tell if the wire or converters are the problem. Those are pretty cheap so it's not surprising that they can really handle a 4k signal. Maybe something like these
https://www.amazon.com/gofanco-HDMI-Extender-60Hz-Bi-Directional/dp/B06X3S94YT
will work better. Read the reviews to see just how complex these devices have to be.
 
  • Like
Reactions: Broker397
Solution
Feb 10, 2019
3
0
10
Feb 10, 2019
3
0
10
I just ordered it. Will reply back once I try it.

Thanks
Unless you try different HDMI to Cat converters there is no way to tell if the wire or converters are the problem. Those are pretty cheap so it's not surprising that they can really handle a 4k signal. Maybe something like these
https://www.amazon.com/gofanco-HDMI-Extender-60Hz-Bi-Directional/dp/B06X3S94YT
will work better. Read the reviews to see just how complex these devices have to be.
Thanks for everything. I ordered the one you suggested - It came in today and so far so good. Appreciate the help!!!!