Question connecting headphone to tv issue

Feb 8, 2019
1
0
10
0
I wanted to hook up headphones to my LG TV model 75UK6190PUB TV, which doesn't have a headphone jack or analog audio out, only a digital optical audio out. Spent ages on the internet researching all this and then went out and bought a digital analog converter and Toslink cable. The headphones are Sennheiser model R120 and worked fine when hooked up to analog on my old LG. I have digital audio output because there is red light on cable. I hooked the analog cable properly and get no signal. Any suggestions?

Here are specs on converter :
  • Digital to Analog Audio Converter: Converts coaxial or toslink digital audio signals to analog L/R RCA and 3.5mm(headphone) Jack audio
  • Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz and 96KHz; 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels
  • Supports Uncompressed 2-channel LPCM or PCM Digital Audio Signal Output; Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM)
  • Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial); Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack; Powered by 5.5mm USB Power Cable (POWER ADAPTER IS NOT INCLUDED); Do Not Use Other Plugs, It Can Only Use 5V 1A Plug

Thanks
 
Last edited:
Thread starter Similar threads Forum Replies Date
J TVs 1
EnDy_S TVs 2
Stormygeddon TVs 1
W TVs 1
A TVs 1
J TVs 1
lgdono TVs 1
R TVs 1
S TVs 0
J TVs 7
L TVs 2
J TVs 1
itsgeeeee TVs 1
JtbLjb797 TVs 1
twinkyk55 TVs 7
Dolli3coutur3 TVs 1
T TVs 4
AreteCrete TVs 2
L TVs 1
D TVs 1

ASK THE COMMUNITY

TRENDING THREADS