Solved! cut wires on security cam with night vision

[keefejustin]

how to hook up usb 2.0 to 5 wire(2 x Red ,2 x black and 1 yellow ) bunker hill 62468 security cam with night vision

 

[The Paladin]

You cannot connect a video camera wires that way you need an adaptor

According to the user manual of the bunker Hill 62468 surveillance camera; https/www.manualslib.com/manual/753843/Bunker-Hill-Security-61208.html?page=1#manual , as seen in the picture below, normally this kind of surveillance cameras are connect via this type of cable, which includes power for the camera and video signal

if you want to connect this to a usb (assuming your looking to use the information feed directly into a computer you will need an

the only converter I have seen is BNC Male to USB Male connectors (see image) but its only 6ft cable (not very practical)

The most common converter is BNC to HDMI converter connect to a dvr at that point. (see picture)
https/www.amazon.com/MakeTheOne-Converter-Adapter-Security-Monitor/dp/B075454YKR

My suggestion is if your lucky enough to be in USA, find the nearest ADI store. https/adiglobal.us/Pages/default.aspx
they are the best in surveillance and will more than likely have or can acquire what you need.

 

[keefejustin]

Thats the kind of cable im kinda looking to make but i am trying to just go from usb 2.0 and twist and soldier whe other end so i need a color code for the cam . Im pretty sure if i twist both reds 12v + and both blacks 12v - to power transformer and then my yellow wire to video + and i was going to run a jumper wire from 12v- to my video - and thats to just a plain ol RCA but i really want to check it on usb if possible even if i have to run a seperate power supply . TYVM for your help everyone

 

[The Paladin]

I would not run 12v through usb....

 

[USAFRet]

Thats the kind of cable im kinda looking to make but i am trying to just go from usb 2.0 and twist and soldier whe other end so i need a color code for the cam . Im pretty sure if i twist both reds 12v + and both blacks 12v - to power transformer and then my yellow wire to video + and i was going to run a jumper wire from 12v- to my video - and thats to just a plain ol RCA but i really want to check it on usb if possible even if i have to run a seperate power supply . TYVM for your help everyone

I'm pretty sure you're going to let the magic smoke out.