hard reset locks up during wipe,android version 4.0.3 vimacro model fj-vortex

[stubby1340]

android tablet vimacro version4.0.3 model fj-vortex,hard reset locks during wipe

 

[webworkings]

Did you remove the SD and SIM cards before you did the reset? If not, then you need to remove them and then use the following to "Hard Reset" the device.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.

 

[stubby1340]

Did you remove the SD and SIM cards before you did the reset? If not, then you need to remove them and then use the following to "Hard Reset" the device.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.

 

[stubby1340]

I followed your directions,works as you said up till it goes to android recovery utility page then E;cant mount/cache/recovery/comand and recovery/log,or open/cache/recovery/log,cant/mount/recovery/last--log,cant open/cache/last log.Then I go to wipe data/factory reset press power,scroll down to delet all user data,then at bottom left of page --wiping data...,formating/data...,and it stops and shuts down.still dont work.

 

[webworkings]

If it is refusing to allow even the "Hard Reset" you might want to try contacting the manufacturer about the issue.