I just purchased this Holy Stone F181C and when I activate the (RTH) Return To Home feature the Drone beeps constantly to let pilot know your in RTH mode but immediately upon pressing RTH the drone Flys away from me approx. 200' or more instead of flying towards where I am standing and where the Drone was binded, calibrated and this is according to the user manual. Once drone is at a long distance away it begins to hover. The manual says not to move from the binding location and I ultimately have to manually bring the Drone back to where I am standing. I contacted Holy Stone and they sent me a cut, pasted response which did not help at all so I'm reaching out to this forum to help me fix this problem if possible. Thnx alot guys, gals for you support!!