Headphones Broke, Need a place to fix them

[GlobalChallenger]

Now these aren't broken in the way that most would think, no, the casing is broken. The internals and everything that has to do with the sound is fine. I have ATH M50x's and the right ear cup has a small part that broke off of it (where the hing meets the cup. This causing the cup to dangle downward and bend back when it shouldn't. This wouldn't be a problem except it causes them to not fit right on my head as it dangles downward and doesn't enclose my ear. I'm curious if there is a place to fix these, all i could find is a website to fix the internals itself and not the shell of the headphone.

 

[Ralston18]

Meaning a replacement part?

Any warranty.....?

What about superglue?

I looked at the pictures and there are four small screws that appear to open up that area.

Use a pin to sparingly apply the glue as necessary.

Worth a try if you are up to such things....

 

[GlobalChallenger]

My Warranty ran out last summer (6 months ago), also I don't have the piece that broke so i cant glue anyhting. I'm going to search for it now and see if i can do what you said

 

[GlobalChallenger]

Welp (not very professionally said), I found the 2 parts that broke off (at the time i didn't know it broke in half.) Thanks a lot for the help and i'm going to start trying to unscrew it. I'm going to wait a bit to see if someone else has something to (which i doubt) and then i will pick you for the solution, i promise.

 

[GlobalChallenger]

Meaning a replacement part?

Any warranty.....?

What about superglue?

I looked at the pictures and there are four small screws that appear to open up that area.

Use a pin to sparingly apply the glue as necessary.

Worth a try if you are up to such things....

I didn't even need the glue. just shoved the piece right in and boom it works. i'm going to try to glue it anyways but it might not need it. THANKS ALOT