I have an older organ I recently got that seems to have bad speakers (or atleast one). I want to take them out and test them individually as well as put in temporary ones to test with the organ to confirm they are the issue, but i'm not entirely sure what speakers would be suitable.
The two speakers don't have ohm or watt ratings printed on them only part numbers "581207" and "581208", I could only find info on the "581208" and from the one thread I could find it seems it says it reads around 7-8ohms on a multimeter making it actually a 12 ohm rated speaker, I'm assuming the "581207" would be the same impedance but still have to test them individually.
So two questions really.
Is there any way to tell, or does anyone happen to know what wattage rating these speakers are.
And assuming they are both "12 ohm rated" speakers and they seem to be wired in series if im correct, would any two 12ohm speakers also in series work temporarily or would any other configuration also work?
Here are the backs of the speakers as well as the wiring diagram on the organ.
The two speakers don't have ohm or watt ratings printed on them only part numbers "581207" and "581208", I could only find info on the "581208" and from the one thread I could find it seems it says it reads around 7-8ohms on a multimeter making it actually a 12 ohm rated speaker, I'm assuming the "581207" would be the same impedance but still have to test them individually.
So two questions really.
Is there any way to tell, or does anyone happen to know what wattage rating these speakers are.
And assuming they are both "12 ohm rated" speakers and they seem to be wired in series if im correct, would any two 12ohm speakers also in series work temporarily or would any other configuration also work?
Here are the backs of the speakers as well as the wiring diagram on the organ.