How to service studiomaster desk

stevemacuk

Honorable
May 27, 2012
1
0
10,510


Hi dbrad, The most common issue for faders (slide) & pots (rotation) noise, is dirt or dust build-up on their carbon film track.

This results in a 'cracking-sound' noise as the lever or knob is moved.

To overcome this, buy an electronic CONTACT CLEANER from RS (radio shack) or MAPLIN. Generally this is NON-CONDUCTIVE and can be applied while the unit is powered up,... so spray a small amount (less than a second duration) of this into the fader or pot & then move up & down or rotate back an forwards until the 'crackling-sound' stops.

NOTE: The 'pots', can only be serviced from inside the unit or with the boards taken out of their position.

http://www.maplin.co.uk/contact-cleaner-25340
http://uk.rs-online.com/web/p/contact-treatment/1014937/

Steve Mac