How to upgrade ram on acer e5-473

coranisa

Estimable
Nov 2, 2015
1
0
4,510
0
i have new ram. and i have place it to the socket. but when i load to bios, cant read a new ram i installed. so.. how to make my new ram can read in bios? sorry for my bad english
 
Hi,

First make sure that the RAM you have is supported or compatible with your laptop. According to the specification of your laptop, maximum RAM for it is 16GB you already have one 4GB RAM inside it. The RAM you also need is a DDR3L SDRAM and two 8GB cards to make it 16GB. RAM's are actually plug and play and you don't need to configure anything else to make it run. :)
 
Hi,

First make sure that the RAM you have is supported or compatible with your laptop. According to the specification of your laptop, maximum RAM for it is 16GB you already have one 4GB RAM inside it. The RAM you also need is a DDR3L SDRAM and two 8GB cards to make it 16GB. RAM's are actually plug and play and you don't need to configure anything else to make it run. :)
 
Thread starter Similar threads Forum Replies Date
Please give me strength Laptop Tech Support 2
Cem_Kbn Laptop Tech Support 1
T Laptop Tech Support 2
Kv1n20 Laptop Tech Support 1
C Laptop Tech Support 6
BruRomeo Laptop Tech Support 2
D Laptop Tech Support 5
B Laptop Tech Support 2
4 Laptop Tech Support 0
K Laptop Tech Support 0
Wayss37 Laptop Tech Support 0
Mindaugas1 Laptop Tech Support 1
Rich2355 Laptop Tech Support 0
S Laptop Tech Support 0
J Laptop Tech Support 3
B Laptop Tech Support 1
L Laptop Tech Support 3
Darzapo Laptop Tech Support 1
P Laptop Tech Support 1
I Laptop Tech Support 1

ASK THE COMMUNITY