Hp DV9000 Broken usb connector on motherboard.

[Neeliyo]

Hi,

Recently I tried to re flow my hp dv9310ca however when trying to pull out the usb 4 pin connector on the motherboard I broke the little white connector. All the 4 wires are intact but missing the white connector.(black, blue, green, white) Is there any way to fix this or purchase a new connector?

Thanks in advance

 

[scout_03]

you could check that video http://www.youtube.com/watch?v=aqbHsnwKNnw and here are some port connector http://www.amazon.com/Replacement-Connector-Laptop-Notebook-Motherboards/dp/B006IAZIAI

 

[Neeliyo]

you could check that video http://www.youtube.com/watch?v=aqbHsnwKNnw and here are some port connector http://www.amazon.com/Replacement-Connector-Laptop-Notebook-Motherboards/dp/B006IAZIAI

Thanks for your reply, however its not the actual usb cable. This one is a tiny wire encased in black wire from the right of the case. They are just tiny 4 wire connectors. It has to do with the usb in some way but not the actual usb.

 

[scout_03]

there must be the usb wiring cable that transmit poer and data to the port,you could try to solder them back to the port this is the pinout of the cable be carefull when your solder them back that they will not touch one to the other . http://pinouts.ru/Slots/USB_pinout.shtml

 

[Neeliyo]

there must be the usb wiring cable that transmit poer and data to the port,you could try to solder them back to the port this is the pinout of the cable be carefull when your solder them back that they will not touch one to the other . http://pinouts.ru/Slots/USB_pinout.shtml

So there is no way to buy the white connector? I don't have a solder gun or solder. If I were to buy some just solder the 4 wires?

 

[Neeliyo]

there must be the usb wiring cable that transmit poer and data to the port,you could try to solder them back to the port this is the pinout of the cable be carefull when your solder them back that they will not touch one to the other . http://pinouts.ru/Slots/USB_pinout.shtml

Also what if I were to just leave it and not fix it?

Thanks scout 😀

 

[Neeliyo]

http://www.ebay.ca/itm/NEW-AC-DC-CHARGER-PORT-POWER-JACK-USB-BOARD-65W-HP-PAVILION-DV6500-DV6700-/110868327228?pt=Laptop_Adapters_Chargers&hash=item19d0446b3c&_uhb=1#ht_1982wt_1163

This is exactly what I need but for the DV9000!

 

[scout_03]

look at this http://www.laptopking.com/searchmodelresults.asp?brand=HP&model=dv9000%20series&txt=Pavilion%20DV9000%20Series

 

[Neeliyo]

look at this http://www.laptopking.com/searchmodelresults.asp?brand=HP&model=dv9000%20series&txt=Pavilion%20DV9000%20Series

Im just going to leave it I can use the other 3 usb ports.

Thnkas a lot scout : D

 

[Neeliyo]

Best answer selected by Neeliyo.

 

[Neeliyo]

look at this http://www.laptopking.com/searchmodelresults.asp?brand=HP&model=dv9000%20series&txt=Pavilion%20DV9000%20Series

I have one last question. 😛 Since the usb cable i use the most is broken(black white green blue) can switch a working usb cable like (black orange red brown) with the broken one? or will it not work.

Thanks

 

[scout_03]

link to wire pinout http://beyondthekeeboard.wordpress.com/2010/10/30/hacking-away-with-android-pt-2-making-your-own-usb-host-cable/ and this one http://paulski.com/zpages.php?id=1713

 

[Neeliyo]

link to wire pinout http://beyondthekeeboard.wordpress.com/2010/10/30/hacking-away-with-android-pt-2-making-your-own-usb-host-cable/ and this one http://paulski.com/zpages.php?id=1713

Im kind of a noob can you explain this. Basically can i switch out the blue black white green usb cable with the black orange red brown cable and still work?

Thanks

 

[scout_03]

you have to put the exact color but dont keep 2 set of cable on the same connector .

 

[Neeliyo]

you have to put the exact color but dont keep 2 set of cable on the same connector .

Aww so I cant mix the blue black white green with the black orange reed brown?