is connecting my TV optical out to Analog Receiver's Phono Input a bad idea?

Sep 7, 2018
2
0
10
0
I have a Panasonic Plasma TV with an optical audio out.
I have an Onkyo Receiver with component audio in. CD and Tape are in-use already.
I have an optical-to-analog adapter.

I tried using the "Video 1" input on my Onkyo. The sound was very, very low compared to the CD carousel (using CD input) or the Bluetooth receiver (using the Tab input).

I tried running it into Phono. It works (I have to keep volumn pretty low on receiver).

I am not an electrician or that great w/ the details, but I know phono input is very differerent than other inputs.

Does anyone know if this set-up is a bad idea, like it could damage / blow my speakers? Any advice (assume I want to keep the analogue set-up).

Thanks.
 

jay32267

Respectable
Mar 16, 2017
526
0
2,110
154
Here's the deal....the phono input has a higher amplification than a CD input or a tape input etc.

This is why >>>>(I have to keep volumn pretty low on receiver).

If it's working and it sounds good to you, you aren't going to hurt anything.

The problem would be....if you drive the phono input too hard....in which case it would sound distorted.....if it doesn't sound distorted you aren't driving it too hard....although being you are using an optical to analog adapter I would almost expect it would sound distorted because those are generally made for tape/CD level signals.



 
Sep 7, 2018
2
0
10
0
thanks, jay32257!
I did think to run a better test. when I first hooked it up, I had some drama playing. I tried a Rush documentary last night. it did not take long before the sound became distorted. I switched back to another input.

it's a little annoying that I have to turn my volume up quite higher than expected for TV versus other components, but I have plenty of room left to crank it further.

I am curious why the volume is so much lower, but I'm thinking it's not a real issue.

thanks, again.
 
1. Having to turn the volume up is not a "real" issue. Just a bit annoying. Some receivers have a volume offset adjustment for each input for this in the menu system.
2. You can't use the phono input. The first problem is that it will overload and distort. The second is that the phono input has RIAA equilization which is just for vinyl playback. That will screw up the frequency response big time with a line level source.
 
Thread starter Similar threads Forum Replies Date
J Audio 9
H Audio 2
C Audio 1
D Audio 2
C Audio 1
J Audio 1
S Audio 1
M Audio 1
R Audio 2
R Audio 1
K Audio 2
C Audio 1
A Audio 1
B Audio 1
B Audio 1
G Audio 6
T Audio 6
D Audio 3
T Audio 1
M Audio 5
Similar threads
Question How do I connect an older Yamaha AV receiver with no optical or HDMI, only RCA, to my TV and able to play sounds.
Question How do i connect my logitech z623 speaker to my uhd tv?
Discussion Optical connections
Question Sound Problems connecting optical lead from 4k LG tv to Harman Kardon AVR 7000 amp
Question Sound blaster z connect Logitech Z906 to optical in or out
Solved! How to get my lg magic remote to control my sony stereo receiver connected through optical cable
How to connect USB headset to device with optical output?
I'm trying to connect a polk sd1 sound bar to a Toshiba 58L5400U TV. I connected the optical wire, but it will not work. It's
Solved! how do i connect my konzert sound bar to my sharp aquos tv model LC-40LE 185M that doesnt have optical and hdmi arc ?
Solved! help with TCL 55R617 tv with polk audio soundbar connected with optical toslink
Solved! Connecting sound bar to the tv through optical cable
I have new Samsung tv with a connect box with one optical plug. No rca plugs. I have a sound bar connected to the optical port
How to connect samsun hospitality tv model hg40aj570mk that have hdmi rca to soundbar that have aux usb optical
How can I connect 5.1 HCS by optical to JVC Smart tv without optical connection
Solved! Connect Panasonic Sounbar (Optical) to Sanyo TV (CoAx)
Cable box audio out analog vs. TV Optical audio out with converter to analog. Which connection to an analog pre -amp is sonica
I need help connecting TV to Soundbar. TV has no optical or analog output.
How can I connect analog Inspire T7700 speakers to my tv optical output?
how to connect analog audio input to stereo amplifier to optical output of Panasonic TC-L32C12 TV?
Definitive best 5.1 connection? optical/analog/hdmi?

ASK THE COMMUNITY