Is there a converter for 2 pcs speaker wire to rca

[Triflexer]

I have an old Sony subwoofer which I want to switch out for a subwoofer with its own additional power source. But the subwoofer I have settled on takes rca. https/www.amazon.ca/dp/B006RG232O/ref=cm_sw_r_awd_hE.cwb7N3AWXZ
Is there a converter that will take a 2 pcs speaker wire and convert it to rca. Or if you know of a better subwoofer that can take 2pcs speaker wire, that would be good too. Thx for your help

 

[Ironsounds]

Hello... Does your Receiver have a TAPE OUT RCA Jack? This can provide a active Audio source that will match the impedance of your Subwoofer input.

 

[americanaudiophile]

The tape record out would be fixed so the sub volume would not change with the main volume.
You can use one of these
http/www.crutchfield.com/p_142LOC80/Scosche-LOC80.html
to convert speaker level to line level for the powered sub.

 

[Triflexer]

Hello... Does your Receiver have a TAPE OUT RCA Jack? This can provide a active Audio source that will match the impedance of your Subwoofer input.

sorry for the late response. i believe it has something like that but that send all of the sound (treble, mid, bass) to the subwoofers?

 

[Triflexer]

The tape record out would be fixed so the sub volume would not change with the main volume.
You can use one of these
http/www.crutchfield.com/p_142LOC80/Scosche-LOC80.html
to convert speaker level to line level for the powered sub.

sorry for the late response, so my system only has a 2 pcs wire (one blk and white) where the converter has a 4pc wire (2 blk and 2 white). so how would i connect them to make it work?

 

[Ironsounds]

Hello... It will allow stereo image/speakerwires to be connected and it will give a mono Line level output for Subwoofer use. Does your subwoofer have a crossover built into it?... Does the instructions agree or included?