Is there a way to connect two jbl pulse 2 as stereo on the pc

[Jorge Eduardo]

Hello everyone, i bought two jbl pulse 2 speakers to use them as stereo on my pc, but i would like to know if there is a way to use them as stereo speakers with AUX cords or connected directly to pc without bluetooth. I ask this because i have problems connecting both to make it stereo, it always take 30 to a minute to sound good everyt time a play a song individually

 

[jsmithepa]

At first glance, the Pulse 2 DOES seem to have an aux port, so......

 

[americanaudiophile]

As you have found out 2 single bluetooth speakers can't be used to make a stereo pair.
You can use the aux inputs but the cable to do it aren't standard since the aux inputs are stereo.
An adapter like this one
http/www.sweetwater.com/store/detail/YMM261?adpos=1o5&creative=54989267161&device=c&matchtype=&network=g&product_id=YMM261&gclid=CNa7iMW7nNECFRBLDQodxh8KXw
will give you separate mono left and right outputs at the PC.
You will need two cables. Each will need a 3.5mm mono plug at one end and 3.5mm stereo plug at the other end. The single pair of wires from the mono side needs to connect to both the left and right connections at the stereo side (at the speakers). It's not a hard cable to make but I suspect that you won't find it already made.
You could try cables with mono 3.5mm connectors at both ends.