My battery loses its charge drastically if I leave it idle

justfiza

Commendable
Nov 9, 2016
1
0
1,510
I haven't used my system in a month, and my sibling had tendencies to shut the monitor without switching off the laptop (may have done this 2 to 3 times - this was during the time it was in constant use). I think it works fine when I use it.
 
Solution
Usually the battery will only drain like that if there is something running, even if you aren't actively using the laptop.

It could be a virus, malware, an installed program, etc. A good way to test this is to restart the computer in "Safe Mode" and see if the problem stops while you are in it. If it does, then you have to locate the program, etc., that is causing the issue and remove it.

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable "Safe Mode" with...
Usually the battery will only drain like that if there is something running, even if you aren't actively using the laptop.

It could be a virus, malware, an installed program, etc. A good way to test this is to restart the computer in "Safe Mode" and see if the problem stops while you are in it. If it does, then you have to locate the program, etc., that is causing the issue and remove it.

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable "Safe Mode" with Networking.
( Once "Safe Mode" with Networking starts, Windows is in Safe Mode, with additional network and services for accessing the Internet and other computers on your network.)

c. Press the "F6" key to Enable "Safe Mode" with Command Prompt.
(In "Safe Mode" with "Command Prompt" starts Windows in Safe Mode, with a Command Prompt window instead of the Windows interface. This option is mostly only used by IT professionals.)

Now sign in to the computer with your account name and password. (If you have one set.) When you are finished troubleshooting, you can exit "Safe Mode" restarting your computer.


In Windows 7/Vista/XP...

1. Immediately after turning on the computer, or restarting it (usually after you hear your computer beep), tap the F8 key, repeatedly, in 1 second intervals.

2. The computer will then display hardware information and run a memory test.

3. Next the "Advanced Boot Options" menu will appear.

4. In the "Advanced Boot Options" menu use the arrow keys to select "Safe Mode" or "Safe Mode with Networking" and press ENTER.
 
Solution