my hp wont start past the windows logo, just a blank screen with the cursor

Gina_27

Prominent
Mar 25, 2017
1
0
510
0
it will show the ssafe mode, safe mode with networking etc, wont start up in any past the windows logo, then it goes black with the cursor on the screen, I can move the cursor but a black screen
 
Try this....

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try this....

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
C Laptop Tech Support 1
T Laptop Tech Support 1
S Laptop Tech Support 2
N Laptop Tech Support 1
R Laptop Tech Support 15
J Laptop Tech Support 3
D Laptop Tech Support 2
H Laptop Tech Support 2
D Laptop Tech Support 9
S Laptop Tech Support 1
W Laptop Tech Support 2
E Laptop Tech Support 3
O Laptop Tech Support 5
D Laptop Tech Support 1
D Laptop Tech Support 1
A Laptop Tech Support 1
T Laptop Tech Support 2
L Laptop Tech Support 1
J Laptop Tech Support 1
A Laptop Tech Support 3
Similar threads
Question Windows 10 not starting up shows black screen on my connex laptop slim book 2. Only power light is on
Question Tobisha satealite windows 7 forgot password cannot start in safe mode.. virus?
Question Windows starts last played media automatically
Solved! HP Compaq nx6125 - Windows failed to start - boot configuration data error
Solved! I did system restore on windows 10 acer laptop won't start has blue screen with error mgs
Lenevo thinkpad won’t start up
Internal HDD turned external, won't start Windows
Solved! Laptop stuck on start up screen
My laptops started glitching
Solved! Apps are not coming after the laptop starts, screen is coming but unable to click the windows button also and main application
I have a acer aspire windows 7 computer. Keeps reading press f2 to start. Won't move past
Lenovo y50-70 doesn't start
asus laptop with black screen starts itself when plug in the power cable
Task bar and windows start screen not working..
I was installing windows 10 in my windows 8 lenevo E 49 laptop and due toh charging issue it turned off now when i m starting
my acer aspire e15 es1-512-c78t screen will not work at start up during the bias system screens then works once windows starts
What does the windows product key start with how many numerals
My Asus laptop window 7 blank screed power is on can here the start sound but screen totally blank help me pls
acer aspire 5536 screen goes blank except for cusor after the windows start up screen.
Start-up repair hangs on to a blank windows screen.

ASK THE COMMUNITY