My old coax antenna input tv won't work if I feed the output of direct tv to it via a radio shack ch3 rf modulator

Jul 3, 2018
1
0
10
0
If I take my direct tv receiver and feed component cables to a radio shack rf converter 75 ohm coax then hook it to a old tv with only that signal input then why won't it work?
 
To clarify you connected the yellow RCA video and red and white RCA audio outputs of the DTV box to an RF converter.
The RF converter will output on either channel 3 or 4. Did you select that channel on the old TV?
If the DTV box has HDMI the AV outputs may not be active.
The RF converter could be bad.
 
Thread starter Similar threads Forum Replies Date
Widget51 Streaming Video & TVs 5
W Streaming Video & TVs 2
O Streaming Video & TVs 3
T Streaming Video & TVs 3
C Streaming Video & TVs 9
E Streaming Video & TVs 6
W Streaming Video & TVs 3
Jonas P Streaming Video & TVs 1
A Streaming Video & TVs 1
C Streaming Video & TVs 1
S Streaming Video & TVs 1
L Streaming Video & TVs 1
L Streaming Video & TVs 1
M Streaming Video & TVs 6
C Streaming Video & TVs 1
B Streaming Video & TVs 1
S Streaming Video & TVs 1
N Streaming Video & TVs 17
M Streaming Video & TVs 1
M Streaming Video & TVs 2

Similar threads


ASK THE COMMUNITY