Need help with a Runco LJR I

[Guest]

Archived from groups: alt.video.laserdisc (More info?)

My LJR-I has a problem with the white highlights looking
"posterized" (quantitized), I'm guessing it's a simple
adjustment. Does anyone have a copy of the service manual?

I also have a question that could be answered from the
service manual. What does the output path look like for
the y/c and composite signals? Is the separation does early
and the y/c then recombined to create the composite signal? I'm
worried that it is, the manual mentions a "proprietary high
speed y/c summing circuit". Is this one of the few ld players
that you should use the s-video output from?

nabil <AT> spiritone -dot- com

 

[Guest]

Archived from groups: alt.video.laserdisc (More info?)

i have an ljr-II, and on the remote there is a posterization feature--- you
can select varying degrees of the effect. you may have turned it on by
mistake. check your ljr-I, and if you see this, cycle through the settings
and it may solve your problem. enjoy---
"Aaron Nabil" <ctnabil@spiritone.com> wrote in message
news:65354389.0405130309.1fca81ec@posting.google.com...
> My LJR-I has a problem with the white highlights looking
> "posterized" (quantitized), I'm guessing it's a simple
> adjustment. Does anyone have a copy of the service manual?
>
> I also have a question that could be answered from the
> service manual. What does the output path look like for
> the y/c and composite signals? Is the separation does early
> and the y/c then recombined to create the composite signal? I'm
> worried that it is, the manual mentions a "proprietary high
> speed y/c summing circuit". Is this one of the few ld players
> that you should use the s-video output from?
>
> nabil <AT> spiritone -dot- com