No drivers for Radeon HD6550M for Windows 10

[MileTrafika]

I have a problem with my Graphics Card and my Windows (I think). I installed Windows 10 on my laptop (Acer Emachines E732G) and downloaded the driver from official AMD site, but if I do that it says that i installed 5000 series, and I have Radeon HD6550M. So I erased it and installed driver from Emachines official site for Windows 8. In that case dxdiag says that i have installed driver for Radeon HD6550M but I can't start Catalyst Control Center (this happens https/ibb.co/dQYSdv ). And Windows 7 drivers for my laptop doesn't recognise VGA on Windows 10. So if anyone had this problem and solved it, or you just know how to solve it, can you help me?
Thank you in advance.

 

[GreyCatz]

First of all, it seems that your eMachines E732G is not supported on Windows 10 from emachines.com. You can run Windows 10, but the support limitations will cause problems at some point. Like right now, with the AMD/Catalyst problem. My only advice is to try one more time:

Un-install Catalyst completely from your system and re-install it from this AMD page:
http/support.amd.com/en-us/download/desktop/legacy?product=legacy3&os=Windows+10+-+64

Once Catalyst is fully restored, install the March 2016 driver. This driver supports Windows 10 and your HD 6000-series GPU. Device Manager should now identify your GPU correctly. If it doesn't, I'm afraid you've reached the end of the road with your eMachine because AMD doesn't provide drivers after this date.

Best of luck,
GreyCatz.

 

[MileTrafika]

First of all, it seems that your eMachines E732G is not supported on Windows 10 from emachines.com. You can run Windows 10, but the support limitations will cause problems at some point. Like right now, with the AMD/Catalyst problem. My only advice is to try one more time:

Un-install Catalyst completely from your system and re-install it from this AMD page:
http/support.amd.com/en-us/download/desktop/legacy?product=legacy3&os=Windows+10+-+64

Once Catalyst is fully restored, install the March 2016 driver. This driver supports Windows 10 and your HD 6000-series GPU. Device Manager should now identify your GPU correctly. If it doesn't, I'm afraid you've reached the end of the road with your eMachine because AMD doesn't provide drivers after this date.

Best of luck,
GreyCatz.

I tried, but it didn't work. Thank you for trying to help, i really appreciate it.