Phillips Optical to Speaker

stfark

Prominent
Jun 10, 2017
1
0
510
0
Have a Phillips 4KHD TV, has one optical output. Also have a mini surround system with a Bose Woofer Box with 4 terminals, two for input, two for output that "feed two separate Tweeters. Would like to connect the Phillips Optical Output port with a cable and converter and connect the two output ports from the converter to the two input connector ports on the woofer. Two questions:

1.) if I successfully connect, will the output have enough power to drive the woofer and tweeters?

2.) What equipment do I need?

Thanks, Sid Kraft
 

D34D M34T

Estimable
Sep 8, 2014
5
0
4,510
0
If you upgrade to surround sound amp, make sure it has an optical in you can connect from the TV. Then just set the system to take audio from the TV rather than other inputs. Simplifies setup. You can connect HDMI to the TV then capture the audio from the TV's optical out.
 
Thread starter Similar threads Forum Replies Date
S Streaming Video & TVs 2
G Streaming Video & TVs 1
C Streaming Video & TVs 2
J Streaming Video & TVs 1
M Streaming Video & TVs 1
J Streaming Video & TVs 1
B Streaming Video & TVs 1
V Streaming Video & TVs 4
J Streaming Video & TVs 1
R Streaming Video & TVs 2
A Streaming Video & TVs 1
J Streaming Video & TVs 1
W Streaming Video & TVs 1
S Streaming Video & TVs 2
T Streaming Video & TVs 1
M Streaming Video & TVs 1
T Streaming Video & TVs 2
J Streaming Video & TVs 1
N Streaming Video & TVs 5
A Streaming Video & TVs 1

ASK THE COMMUNITY