Quick question about holding 0

Dimerz

Estimable
Aug 6, 2015
5
0
4,510
0
So, when holding the 0 button on a toshiba and then proceding will it remove the os (Windows 7) cant get into my computer as it doesnt pass 'windows starting' straight after, it pops up saying along the lines of windows shut down to prevent damage.
 

Dimerz

Estimable
Aug 6, 2015
5
0
4,510
0

What do you mean press enter? Where do i press it and when?
I did check my fans and they were VERY dusty gave them a good clean but the message keeps popping up.
 

Dimerz

Estimable
Aug 6, 2015
5
0
4,510
0


http://imgur.com/RlyW7sl
 

Alex192

Estimable
Aug 11, 2015
12
0
4,570
2


Did you have a factory state recovery partition?
 

Alex192

Estimable
Aug 11, 2015
12
0
4,570
2


It basically allows your laptop to return to the state it was bought in. So if it is caused by viruses or bad boot controller driver, it will all be automatically fixed at the expense of your data if you haven't backed up. If it is a hardware problem i.e you have a faulty HDD or something, you'll have to go to a repair center.
 
Thread starter Similar threads Forum Replies Date
Thaboss6 Laptop Tech Support 1
M Laptop Tech Support 2
J Laptop Tech Support 3
S Laptop Tech Support 1
X Laptop Tech Support 2
B Laptop Tech Support 2
F Laptop Tech Support 1
A Laptop Tech Support 3
C Laptop Tech Support 3
A Laptop Tech Support 6
P Laptop Tech Support 6
W Laptop Tech Support 1
J Laptop Tech Support 2
B Laptop Tech Support 8
S Laptop Tech Support 2
T Laptop Tech Support 3
A Laptop Tech Support 9
I Laptop Tech Support 3
X Laptop Tech Support 5
mikteafool Laptop Tech Support 9

ASK THE COMMUNITY