I have a pair of Dr. Dre Beats Solo HD headphones. I got them for $30 about a year ago. I'm quite fond of them, and i like working with electronics. My right side speaker stopped working after awhile, so i took them apart to fix them. I've replaced the speaker, headphone plug, and the wires going from speaker to speaker. The problem i'm having, is the right side speaker produces no bass and significantly quieter than the left side. The left side speaker has the headphone plug connected to it with less than an inch of wiring. The right side has about 4-5 inches of wiring connecting it to the headphone plug. When i swap the speaker the problem remains the same. What am i doing wrong? I'm almost positive this was the same length of wire used in the original set up.