RTV5040 Setup menu doesn't show options to switch from dial-up to ethernet.

dramyon

Honorable
Oct 23, 2013
2
0
10,510
0
Inherited a Replay TV 5040 from my daughter. I dont have a phone jack near the DVR but I do have ethernet. I've gone through the network settings but only option is to select another phone number. Also, I never get to the quick setup screen to configure the basic settings. Anyone know what's going on? BTW, the unit has been sitting in a closet for the last 3-1/2 years if that means anything. Also, the unit does obtain an ip address from the router an is communication on the LAN. Just cant seem to find where to change from dial-up to ethernet.
 

dramyon

Honorable
Oct 23, 2013
2
0
10,510
0
From another forum: If you don't mind erasing everything on your RTV, I would use 3-8-2-Zones to Factory Reset the unit and go back through the quick setup.

Issue solved. I was able to go through the quick setup to make the changes needed for my system.
 
Thread starter Similar threads Forum Replies Date
F Streaming Video & TVs 0
ddk0014 Streaming Video & TVs 1
A Streaming Video & TVs 1
A Streaming Video & TVs 2
D Streaming Video & TVs 1
J Streaming Video & TVs 1
B Streaming Video & TVs 2
F Streaming Video & TVs 2
S Streaming Video & TVs 7
T Streaming Video & TVs 2
K Streaming Video & TVs 1
W Streaming Video & TVs 4
A Streaming Video & TVs 1
K Streaming Video & TVs 1
S Streaming Video & TVs 2
T Streaming Video & TVs 1
T Streaming Video & TVs 1
J Streaming Video & TVs 2
R Streaming Video & TVs 3
T Streaming Video & TVs 4

ASK THE COMMUNITY