Some advice on CPUID Hardware Monitor

[Newjackred]

Hello everyone. So basically I recently finished my first build, and after some headaches here and there, it seems to be running fine. I downloaded HWmonitor to check my temps and I'm a bit confused. I can't seem to understand which temps are what. There's two CPU temps, one under the motherboard along with mainboard, and the main CPU one. Is the mainboard my motherboard temp? I was hoping someone could check for me to see if everything's normal. Thanks

Readings under load:

 

[mbreslin1954]

Yes, mainboard = motherboard, just two different terms for the same device.

 

[Wisecracker]

Your 12-volt line looks a little wobbly. You should run a stability test and check your volts and temps.

Too much information is good, too. Check out the AMD OverDrive utility for system status (and a stability test) and comparison. If AH-Seuss offers a monitoring utility for your motherboard, check it out, too.

Then, you can pick whatever system temps you like