Specc for laptop / workstation for Cad and 3D software

Dec 11, 2018
3
0
10
0
Laptop for Cad/magi CAD and revit and naviesworks 3D . What kind off specc do i need that dose not use nivida Quatro. What kind of cpu should i go for and Gpu ? Price range around 25000 K Swedish krons (2500 dollors)
 

ebosss03

Great
May 1, 2018
37
0
90
7
The 7 2700U or I7 8th gen then. I have looked at some of the programs and those do not need really much CPU power but for 3D moddeling the 1080ti is a good pick for large projects if you have small projects the 1070 or 1080 will do just as fine. I would aslo recommend an SSD.
 

ebosss03

Great
May 1, 2018
37
0
90
7
AMD TR2 and the 1080TI the 1080TI or the 2080TI Because it offers 11GB of VRAM and that is great when using 3D programs. I would also recommend to get 32Gb of RAM but with 2500 Dollars you should be able to get all this.
 

ebosss03

Great
May 1, 2018
37
0
90
7
The 7 2700U or I7 8th gen then. I have looked at some of the programs and those do not need really much CPU power but for 3D moddeling the 1080ti is a good pick for large projects if you have small projects the 1070 or 1080 will do just as fine. I would aslo recommend an SSD.
 
Thread starter Similar threads Forum Replies Date
LeoLuca Laptop Tech Support 3
S Laptop Tech Support 0
W Laptop Tech Support 5
Thanh Hai Nguyen Laptop Tech Support 2
ShovelSaint Laptop Tech Support 1
Sniper_Htun Laptop Tech Support 0
D Laptop Tech Support 0
Roger- BiTNET Laptop Tech Support 0
P Laptop Tech Support 0
Roger- BiTNET Laptop Tech Support 2
O Laptop Tech Support 1
T Laptop Tech Support 0
R Laptop Tech Support 0
aparky42 Laptop Tech Support 1
nrmndv Laptop Tech Support 0
Edu2k Laptop Tech Support 5
cesc4 Laptop Tech Support 14
Tsaadlorsh Laptop Tech Support 0
L Laptop Tech Support 0
Nixie_Naxie Laptop Tech Support 0

ASK THE COMMUNITY