tablet not booting on after pressing power button

omoteraf

Commendable
Feb 4, 2017
3
0
1,510
0
My tablet is absolutely fine, it charges well until one morning after being in the charge overnight, it was 100% full..but it never booted on as usual...it just displays Techno' after pressing power on button.
What is the issue ?
How can I fix it???
 
It could be a few things that are the cause.

NOTE: If it is under warranty still, then I would contact the manufacturer about a repair or replacement.

You could try starting it in "Safe Mode" to see if it will load. If it does, then you probably have something (bad app, malware, virus, etc.,) on the tablet that will need to be removed to fix the problem.

If it won't start in "Safe Mode" then you may want to try a "Hard Reset". However I would save that as a last resort, as it will wipe all personal data off the tablet and due a full reset of it.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.


NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.
 

omoteraf

Commendable
Feb 4, 2017
3
0
1,510
0


 

omoteraf

Commendable
Feb 4, 2017
3
0
1,510
0
It doesn't have a command options.' No commands' that's what it says when booting ib safe mode..on the other options volume up option can't be used okay
 
I said nothing about any 'command options' when referring to "Safe Mode" or at all for that matter.

What I did say was, go into "Safe Mode" and see if it will boot. If it does, then the problem is something on the tablet. Bad app, malware, etc.

 
Thread starter Similar threads Forum Replies Date
scwolves10 Android Tablets 5
S Android Tablets 1
M Android Tablets 1
D Android Tablets 3
P Android Tablets 1
N Android Tablets 1
K Android Tablets 1
R Android Tablets 7
E Android Tablets 1
N Android Tablets 1
N Android Tablets 3
C Android Tablets 1
A Android Tablets 9
M Android Tablets 2
A Android Tablets 1
P Android Tablets 2
M Android Tablets 1
L Android Tablets 1
B Android Tablets 2
S Android Tablets 1

ASK THE COMMUNITY