Solved! Toshiba Satellite S55-C5274 is stuck on "Toshiba Leading Innovations" screen.

Dec 13, 2018
Toshiba Satellite S55-C5274. Someone mentioned turning the laptop off when the loading circle starts to turn it off and keep doing that until the laptop comes up with Preparing Automatic Repair. My problem is the loading circle never shows and it just goes to Toshiba Leading Innovations screen and stops.
The the two ways to try what you are referring to are below, but I suggest trying the instructions listed first before trying those, Especially since you did not mention what exactly is going on with the device...

Try this...

1. Turn off the laptop.
2. Turn off your WiFi, or take the laptop to an area where there isn't any WiFi. (If connected via Ethernet, unplug it.)
3. Turn on the laptop.
4. Once it fully loads, then turn on your WiFi again.

Sometimes (especially in 10) updates, including those that come after a reset, can get the computer stuck. It happens when an update fails, for whatever reason, and the device continually tries to get it to install over and over. Leaving you 'stuck'. Until you take away its ability to continue trying the update, hence the no WiFi, then it should load.

Should that not help, then try one of the following...

Note: If this problem started after an update (or system reinstall), please make sure the laptop is not connected to the internet in any way before you use the following instructions.

Try the following...

1. Power off the laptop.
2. Power on the laptop.
3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen.
5. Now you want to let the laptop boot to the "Automatic Repair" screen.
6. Click "Advanced Options" and then select "Troubleshoot".
7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system.
8. From here just follow the screen instructions until the recovery is completed.

NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost.

Do not do a "Reset" as that will wipe all data you have on the laptop.

Another version of this is the following...

1. Power off the laptop.
2. Power on the laptop.
3. When screen turns black, hit F10 and ALT repeatedly until the computer shuts off.
4. To fix the computer you should choose the second option listed.
5. When the next screen loads, choose the option "Reset Device".
6. Now choose which ever type of reset you wish.
7. Your computer should now restore itself to "Factory Settings".

NOTE: If you get a message saying "Error Resetting Device", then you should have the computer looked at by the manufacturer (if still under warranty) or by a tech.

Thread starter Similar threads Forum Replies Date
bd01ng Laptop Tech Support 3
shujinko45fox Laptop Tech Support 1
Ioannis1981 Laptop Tech Support 8
P Laptop Tech Support 1
I Laptop Tech Support 3
T Laptop Tech Support 8
S Laptop Tech Support 2
B Laptop Tech Support 5
S Laptop Tech Support 1
Mandamoe85 Laptop Tech Support 1
M Laptop Tech Support 3
M Laptop Tech Support 2
O Laptop Tech Support 0
Q Laptop Tech Support 2
B Laptop Tech Support 3
R Laptop Tech Support 0
S Laptop Tech Support 1
A Laptop Tech Support 0
I Laptop Tech Support 0
GoogleThread25 Laptop Tech Support 1