TRRS splitter line for single mic and audio lines?..

Design Factor

Estimable
Feb 22, 2015
3
0
4,510
0
So I have thee Skullcandy Grinds which uses a TRRS jack (for the audio drivers and mic running through one line ideal for a phone) and I'm trying to use the mic built-in it on my computer through TeamSpeak. Now the obvious problem there is that a desktop has separate inputs for a mic and audio. So my question is, is there a such thing that will allow me to split the mic line from the audio line to allow me to connect one into the mic input on my desktop as-well the audio input some sort of adapter or something? Hey thanks for any feedback or help!
 

Ralston18

Dignified
Moderator
Yes there are such splitters

E.g.: StarTech 3.5mm 4 Pin to 2x 3 Pin 3.5mm Headset Splitter Adapter - F/M

Google "TRRS splitters" and you will find a variety of products and sources available. Just pay close attention to the plug sizes, genders, and pinouts.

That splitter will get the audio and mic separated.
 

Ralston18

Dignified
Moderator
Yes there are such splitters

E.g.: StarTech 3.5mm 4 Pin to 2x 3 Pin 3.5mm Headset Splitter Adapter - F/M

Google "TRRS splitters" and you will find a variety of products and sources available. Just pay close attention to the plug sizes, genders, and pinouts.

That splitter will get the audio and mic separated.
 

Design Factor

Estimable
Feb 22, 2015
3
0
4,510
0


Thank you so much I found it!
 
Thread starter Similar threads Forum Replies Date
SenNive Audio 3
T Audio 1
atesba Audio 3
tophatclay Audio 0
R Audio 1
aiden_crawford Audio 1
C Audio 3
E Audio 0
L Audio 2
K Audio 1
iHacki44 Audio 2
R Audio 2
K Audio 1
L Audio 3
R Audio 1
C Audio 1
M Audio 1
D Audio 1
M Audio 4
J Audio 4

ASK THE COMMUNITY

TRENDING THREADS