Two antennas connected to a TiVo

petergmauro

Estimable
Jun 19, 2014
4
0
4,510
I'd like to receive HD transmissions from two broadcast stations located in different directions.
Can I use two antennas , each pointing to one station, and connect one to the antenna input and the other to the cable input, on a TiVo .
And, let TiVo scan both inputs for stations.
Will TiVo even be able to detect over the air stations on the cable input?

Peter
 

petergmauro

Estimable
Jun 19, 2014
4
0
4,510


can you explain why the cable input can't get OTA signals.
Do you know what the frequencies are?
 

TiVoCableCutter

Estimable
Aug 25, 2014
2
0
4,510
Two antennas can be run through a combiner (opposite of a splitter) and then fed into the single input of the TiVo. There are some considerations on the types of antennas used and cable lengths etc. in order for the signal from one antenna to not simply be radiated back out the other antenna. There are even antennas sold that have multiple elements that can be pointed in different directions which would be a very safe solution to know that everything is matched and will work properly. Additionally depending on how distant the stations are you may be able to use an Omni directional antenna. So there are definite solutions to this issue. Then as long as the signal is being fed to the TiVo the tuners can sort out the needed frequencies.
 

gazingelec

Estimable
Aug 31, 2014
2
0
4,510
well done,Generally you need multiple tuners to pick up stations pointed in wildly different directions. thanks
2QF7mT