Solved! What cable can pass IR signals to IR input port on back of A/V receiver?

[eddified]

This receiver has an "IR IN port"
https/www.onkyousa.com/Products/model.php?m=TX-NR777&class=Receiver&source=prodClass

Please correct me if wrong, this port is so you can setup an IR receiver elsewhere, and have it forward infrared remote control signals to the A/V receiver, correct?

All the IR receivers I find on Amazon come with IR emitters/blasters. But, clearly the point of this IR IN port is to avoid having to use an emitter/blaster, right? So what cable could I actually use to go from the IR receiver to this IR IN port? (Please provide link to product, for example an Amazon product page).

I'm having a hard time locating one because I don't know what to search for. When I search for "IR cable" I always get blasters....

 

[SoNic67]

https/www.amazon.com/TNP-IR-Receiver-Cable-External/dp/B078M6PCY9

 

[eddified]

@SoNic67, thank you, I see that does answer my question as I typed it. But apparently I didn't provide enough detail. What think I need is something that can go from an IR box like this: https/www.amazon.com/BAFX-Products-Extender-Repeater-BAFX3233/dp/B009ZGK6QS/ref=pd_lpo_vtph_23_bs_tr_t_1?_encoding=UTF8&psc=1&refRID=3WV5291908XSMNA1VNP4
... to the receiver.
Basically I need something that collects IR signals from the front of the room, and passes them to the cabinet where all of the equipment is stored, including blu-ray player, etc. If I use something like this, does it mean I can't really use the IR IN port on the receiver? Or should I be able to use a standard 3.5mm cable (male on both ends) to go from the IR box to the AV receiver?

 

[americanaudiophile]

You should be able to use a cable with standard 3.5mm mono male connectors at both ends. That would be the same as the connector at the ends of the IR emitters that are in that kit.
https/www.mycablemart.com/store/cart.php?m=product_list&c=178
You do need a kit like that since you can't usually power an IR receiver directly from the IR input.