What's the correct SSD Caddy & Bezel for a Dell Inspiron 5767?

[Lord_Liverpool]

Hello,

I want to swap out the Optical CD-Rom Drive of my Dell Inspiron 17 (5767) Laptop for a SSD.
It's easy to remove, just one screw! And I know I need to buy a caddy for the SDD to sit inside.
There are plenty of caddys for sale on Amazon and eBay. Just one problem! All of the caddys I've seen so far come with a flat plastic cover. Whereas my laptop has a curved edges. This potentially means I would have a nasty gap where my optical drive use to be.

See images here:

TL;DR

Does anyone know of a caddy that comes with a curved bezel cover especially to fit the Dell 5767?

Thanks very much

Cheers.

 

[velocityg4]

The bezel (faceplate) on a laptop DVD drive is normally detachable. You'd just use a standard SATA SSD to laptop DVD adapter. Detach the faceplate from the DVD drive and connect it to the adapter. It should all be standardarized.

https/www.newmodeus.com/shop/index.php?main_page=page&id=50

So, you'd just use one like this.
https/www.ebay.com/itm/2nd-Hard-Drive-HD-SSD-Caddy-Adapter-for-DELL-Latitude-E6540-Swap-UJ8B2-GU60N-DVD/272761854068?hash=item3f81df9874:g:iaQAAOSw8lpZJBq2

 

[Lord_Liverpool]

@veloctyg4 Thank you for the fast reply!

That's great to know about the detachable bezel(faceplate), that's saved me a headache! Thanks very much. OK I have a further question if you could help me please?

I already have an SSD (256GB) and its accompanying SSD Caddy which I took out of my old Dell XPS 1640 Laptop.
But when I came to put in into my Dell Inspiron 17 (5767) it wouldn't fit as it was too big (Height of 13mm).

I noticed that the Caddy you linked too on eBay has a height of 9.5mm. Which is the same height as the SDD, what a coincidence!
So I'm guessing newer SSD caddies are smaller in height? And if I purchase one my SSD should just fit? I also assume the bezel(faceplate) will be compatible as well?

Thanks very much.

 

[velocityg4]

According to the description. It works with 9.5mm HDD and SSD.

 

[Lord_Liverpool]

@velocityg4

OK thanks very much for your help.

Cheers.

 

[velocityg4]

You're Welcome.