when memory card inserted in my laptop the device is not detected in any of the system if detected a pop-up displaying format

[varunish]

when memory card is inserted in my laptop the device is not detected in any of the system it detected in one system and shows a pop-up displaying format the memory card how to retrive it

 

[Titillating]

http/www.tomsguide.com/forum/id-1640133/recover-lost-smartphone-data.html

 

[sougo]

Hy there it means there are bad file sectors in your memory card, In that you have to fully format it
If you want to fully format it then try this one
This means may be the format was not successful
Then you have to format it again
1) Open turn your cpu on, attach the memory card
2) click on start menu right click Computer and select manage
3) Now a separate window will appear, on the top left corner of it click on the Disk Managment under Storage in the list
4) A Disk should be listed side to the Disk 1 in the middle-bottom page Note: a black bar is attached on it ,that is your memory card, you need to again right click on it and click format
5) wait till its complete then rightclick on it and select assign

OR try this one

It may be mean that you have to format it completly,then try this one

Click on start menu, type diskpart in the search box,and click on the diskpart, under program bar that will appear

(NOTE:Just your memory card and keyboard and mouse were to be stay connected untill its done)

Now a screen with black background will appear
you will see a line written DISKPART_
now type- list disk ,then press enter
A list of disk will appear , under Size search for your memory volume(if its 8GB then it will be written like 8192MB),and search for its corresponding name under Disk ###

Type- select disk 1 ,press enter key
NOTE:IF YOUR MEMORY IS listed AS Disk1 then type select disk 1,if listed disk2 then type select disk2 likewise
Type: clean ,press enter key
wait for some time after cleaning is complete you will see the DISKPART_ again

Type: create partition primary , press enter key
Type: format fs=ntfs , press enter key
Now wait untill format completes

NOW the final one
Type:assign ,press enter key
wait for a message to show "disk part has succeded in assigning"
now remove your memorycard and have fun