wheres reset on 73 in projection mitsubishi tv

rickybear

Commendable
Nov 5, 2016
1
0
1,510
Replaced blub that burned out had power and sound when shut down now power light blinking no sound or picture. ?
 
Solution
Hello.

If you replaced the lamp and now it doesn't power on at all, I suggest you verify all the doors you removed to change the lamp. If one door/plate is incorrectly closed, there is a switch which will prevent you from starting the TV.

Also, have you unplugged the TV for more than 1 minute since changing the lamp? If the TV was plugged when changing it, you will need to reset the TV by unplugging it for 1 min or more.
Hello.

If you replaced the lamp and now it doesn't power on at all, I suggest you verify all the doors you removed to change the lamp. If one door/plate is incorrectly closed, there is a switch which will prevent you from starting the TV.

Also, have you unplugged the TV for more than 1 minute since changing the lamp? If the TV was plugged when changing it, you will need to reset the TV by unplugging it for 1 min or more.
 
Solution