just cleaned my laptop and replaced the thermal paste, this is the 3rd time I replaced the paste, then i did not get any signal to my laptop monitor which was odd. The laptop was powering on and the fan was spinning so I connected a external monitor thru HDMI and it displayed fine. So I thought maybe the connection for the laptop monitor was not good, so I opened the laptop again and fixed the cable. As I powered on the laptop again, this time there was no power, the fan was not spinning, and there is a hissing/ whistling sound coming from the motherboard whenever I connect the charger/ battery. I tried pressing the power button without the charger/ battery to drain excess power, but it still does not work. please help.
Note:
- whenever I connect the charger/ battery this part heats up: https/ibb.co/if8bZx
- I think I fried it with the contact cleaner. not sure if the contact cleaner can fry the board, I tried it on other devices and it doesnt fry any of the other mobos.
Update:
- Just found out that the contact cleaner was not a quick dry solution, I guess the board got fried by the liquid.
Note:
- whenever I connect the charger/ battery this part heats up: https/ibb.co/if8bZx
- I think I fried it with the contact cleaner. not sure if the contact cleaner can fry the board, I tried it on other devices and it doesnt fry any of the other mobos.
Update:
- Just found out that the contact cleaner was not a quick dry solution, I guess the board got fried by the liquid.