S SilverSliver Distinguished Dec 7, 2011 4 0 18,510 Dec 7, 2011 #1 Center channel started popping and hissing and sound cut out. Unhooked it. Now front mains fade out when the unit warms up. Cold solder issue?
Center channel started popping and hissing and sound cut out. Unhooked it. Now front mains fade out when the unit warms up. Cold solder issue?
Solution soundguruman Dec 12, 2011 It is very possible that re-soldering the board may cure the problem.
soundguruman Distinguished Mar 3, 2010 1,799 0 20,760 Dec 12, 2011 Solution #2 It is very possible that re-soldering the board may cure the problem. Upvote 0 Downvote Solution
S SilverSliver Distinguished Dec 7, 2011 4 0 18,510 Dec 19, 2011 #3 Thank you, the problem has progressed. I have lost both front channels as well. To the shop it must go. Upvote 0 Downvote
Thank you, the problem has progressed. I have lost both front channels as well. To the shop it must go.
S SilverSliver Distinguished Dec 7, 2011 4 0 18,510 Dec 22, 2011 #4 Best answer selected by SilverSliver. Upvote 0 Downvote
S SilverSliver Distinguished Dec 7, 2011 4 0 18,510 Dec 22, 2011 #5 Yeah, it was in need of resoldering... cold solder joints were in many places... Upvote 0 Downvote