Compaq Presario CQ41-203TX stucks at boot screen after modded bios setting change

[mani-rai]

Hello,

I have a Compq Presario CQ41-203TX with inysdeH20 version F.0F bios. I installed modded bios found in bios-mods.com for advanced setting. And carelessly configured wrong hardware configuration. Now my laptop stucks in boot screen. If I try to enter my bios, only blank screen appears. I also tried jumper reset, unplugging and plugging CMOS battery but no improvement. I guess modded bios can't be reset. Is there any solution for this problem. I am guessing I converted my laptop to just a piece of crap. Any suggestions for this?

Thanks

 

[viveknayyar007]

Hello mani-rai

You can Download the Stock Version of BIOS for your laptop and then flash it on your laptop from a USB drive.

Feel free to come back in case further assistance is needed.

Cheers!!

 

[mani-rai]

Thanks viveknayyar007 for you quick reply. But I can't go anywhere. Neither I can access bios nor the boot menu. Access those feature just gives me a black screen. I changed Harddisk Controller from AHCI to Something else in bios causing me this problem.

 

[viveknayyar007]

Thanks viveknayyar007 for you quick reply. But I can't go anywhere. Neither I can access bios nor the boot menu. Access those feature just gives me a black screen. I changed Harddisk Controller from AHCI to Something else in bios causing me this problem.

Hello again mani-rai

Although unlikely, hard resetting the laptop may help a bit. To hard reset:

> Pull its battery out.

> Disconnect the power adapter.

> Press and hold down the Power button for around 45-60 seconds.

> Release the Power button.

> Put the battery back in and then try entering the BIOS.

Hope this helps.