Dell 1545 laptop show memory write/read error on start up and beeping

[Guest]

I had a black screen after start up with only cursor showing on the screen, I removed battery, teh same thing, then I pressed F8 and tried logging on in safe mode, nothing happened, i then tried again and did last know good start up it then when back to a screed with a error has found with and open of 1 to 3 3 beign repair fix at the top of the screen and the safe mode at the bottom, it was not allowing me to click on repair so did safe mode again as only one i could click now I am getting the message below and the laptop is bleeping:

" Memory write/read failure at 380196B8. read EE01EE21 expecting EE01EE01. To resolve this issue, try to reseat the memory. Decreasing available memory

I reseated the memory but still getting the above with bleep

Can anyone help? The laptop is only about a year old

 

[Phillip Corcoran]

One or more of the RAM (memory) sticks is faulty and needs replacing.

Find out which stick has errors by testing with Memtest86 on a bootable CD.
The CD image for creating bootable CD (ISO) is here: http/www.memtest86.com/download.htm#free

On a working computer you can use ImgBurn to create the bootable CD from the CD image:
http/filehippo.com/download_imgburn

When you've made the CD, boot your laptop from it and Memtest will load & start running automatically.
Any RAM errors will usually be shown within the first 3 or 4 passes.
Press <Escape> to stop the test at any point.

If two or more RAM sticks are being tested, test them one at a time (by removing the other sticks) so that you know which one needs replacing.

 

[Guest]

One or more of the RAM (memory) sticks is faulty and needs replacing.

Find out which stick has errors by testing with Memtest86 on a bootable CD.
The CD image for creating bootable CD (ISO) is here: http/www.memtest86.com/download.htm#free

On a working computer you can use ImgBurn to create the bootable CD from the CD image:
http/filehippo.com/download_imgburn

When you've made the CD, boot your laptop from it and Memtest will load & start running automatically.
Any RAM errors will usually be shown within the first 3 or 4 passes.
Press <Escape> to stop the test at any point.

If two or more RAM sticks are being tested, test them one at a time (by removing the other sticks) so that you know which one needs replacing.

 

[Guest]

Thank you