Did I just brake my projector?

[Xenoox]

Hello

I've had problems with my Optoma HD200X projector for a while..

It started of with some normal color banding(flickering colors), I was unable to fix by cleaning the projector like I've done multiple times before..

However the projector changed from flickering colors to a stable negative color.. When I turn on the projector the first minute or so it would work fine with correct colors..Also turning off the projector would show correct colors for a split second when it turns off.

After a few cleaning attempts with just blowing dust out the projector with no success.. I decided to take the color wheel out and clean the sensor board and the wheel..

But now I got this:
http/

Have I broken it? And can I fix it?

 

[Kenton82]

The sensor and colour wheel should never be touched. Blowing out dust with a puffer should be ample, as nor the wheel or sensor would get 'dirty' as such. I would order a replacement colour wheel sensor if i where you. DO make sure you check the output of whatever is feeding the projector AND the cable FIRST though.
Good luck!
K.