DirectX Internal error, installation failed

onashx

Commendable
Apr 22, 2016
7
0
1,520
1
Hi everyone, my problem started when I installed Mass-Effect 2, and got the 0xc000007b error, which is related to directx. I have tried downloading the dx redist and re-installing, but when the installation is almost over it says it has an internal system error and fails. I have tried replacing manually the dlls but it says some files are in use and cannot be replaced. I tried all the above in safe mode and as admin, still the same. I tried not to use the web installer, and downloaded the 100mb pack, still no luck. I even uninstalled all the vc redist and re-installed.
I am using a Lenovo Legion Y520, all drivers and system updated.
If one of the good sirs here could help me... The log files are below.
Thank you!
http://
http://
 

onashx

Commendable
Apr 22, 2016
7
0
1,520
1
I found it. After checking the files separately, I saw that only the DX of _39.dll were problematic. So I tried inserting them to the game's directory and it worked. But for some reason Windows wouldn't let me replace them and that was the error in the installation. Inserting them while booting from other OS on USB does the trick.
Thanks for all the help!
 

onashx

Commendable
Apr 22, 2016
7
0
1,520
1
I just did it, on the other laptop it was fine but on mine it fails again :(
It's impressive you can read this log though, so many words!
 

onashx

Commendable
Apr 22, 2016
7
0
1,520
1
I found it. After checking the files separately, I saw that only the DX of _39.dll were problematic. So I tried inserting them to the game's directory and it worked. But for some reason Windows wouldn't let me replace them and that was the error in the installation. Inserting them while booting from other OS on USB does the trick.
Thanks for all the help!
 

ASK THE COMMUNITY