Distorted flickering screen

[alisan13]

I have a fujitsu amilo pi 3565,it started flickering the night before and when I turned it on again the next day the colors were distorted (mainly red) , it went into system repair, turned on again for 3 minutes with distored colors after the system repair, and after that the screen went black. When linked to another screen it worked normally so we did a system reset, upgraded the drivers and flashed bios.
The computer seems to work, but the color is still distorted and it seems to flicker mainly when you type. Suggestions on what the problem might be and how to fix it would be appreciated.
When print screening rthe computer does not register the distortion.

Thanks

 

[Laptop_Nerd]

Hi,

The fact that it works fine using an external monitor it could either be the cable or the actual screen itself that is faulty. Check the cables first and see if they are seated properly and do check if it has any damage or broken circuit on it because if it's intact you might need to get a replacement LCD for your laptop. The way to check also if this is a software or a hardware problem is to boot the laptop into BIOS and if you'll get the same display there it means it's a hardware failure.