# Found G10 but can't get a dc lock on 7 or 13

G

#### Guest

##### Guest

so that my 920 can dl the ch maps. This is the right sat because
outdoor ch is on 24. Is there another sat and ch to dl maps from or is
this it? Also how do you figure frequencies for c band to do a man
tune via opt 6778? Thought I might be able to find another freq from
another sat and digital ch and input it in ch 7 or 13 and do a man
tune to try and get a dc lock. For ku if I recall right you would
subtract 10750 from the freq at lyngsat but what is the formula for c
band? Thanks

G

#### Guest

##### Guest

Your polarity settings may not be correct for the odd numbered
channels. Galaxy 10 xponder 14 may give you a lock and maps.
The default maps for 7 and 13 are correctly defined and should give
you a lock if the dish's position and polarity are correct.

If you tune to a C-Band 2 digit channel the frequency displayed in
options 6778 shown should be correct, or close enough to give you
a digital lock on transponders 7 and 13. The formula for calculating
C-Band IF is 5150 - D.L freq = I.F.

G1 4, 18, or 23 should also have maps.

"Standorfall" <remotecontrolled@nirvanafan.com> wrote in message
| so that my 920 can dl the ch maps. This is the right sat because
| outdoor ch is on 24. Is there another sat and ch to dl maps from or is
| this it? Also how do you figure frequencies for c band to do a man
| tune via opt 6778? Thought I might be able to find another freq from
| another sat and digital ch and input it in ch 7 or 13 and do a man
| tune to try and get a dc lock. For ku if I recall right you would
| subtract 10750 from the freq at lyngsat but what is the formula for c
| band? Thanks

G
Replies
4
Views
6K
G
G
Replies
4
Views
3K
G
G
Replies
2
Views
2K
G
G
Replies
2
Views
3K
G
G
Replies
4
Views
3K
G