Hi, my Acer aspire V5 won't boot up. It turns on and then goes to the aver logo screen and then about 30 seconds later changes

Maniacmac33

Commendable
Oct 3, 2016
1
0
1,510
0
Acer aspire V5 won't go past aver logo start screen and then the logo leaves but the loading symbol stays forever.
 
Did this happen after any kind of update or installation or just out of the blue?

If the former, then you may need to try uninstalling the update to get this resolved. If the latter, then try this and see if it will let you in.

How to enter "Safe Mode" when booting the computer.

In Windows 8 and 10 ...

As your computer restarts, press F8 (possibly a few times) to enter "Safe Mode"

a. Press the "F4" key to Enable "Safe Mode".
(The computer will then start in "Safe Mode" with a minimal set of drivers and services.)

b. Press the "F5" key to Enable "Safe Mode" with Networking.
( Once "Safe Mode" with Networking starts, Windows is in Safe Mode, with additional network and services for accessing the Internet and other computers on your network.)

c. Press the "F6" key to Enable "Safe Mode" with Command Prompt.
(In "Safe Mode" with "Command Prompt" starts Windows in Safe Mode, with a Command Prompt window instead of the Windows interface. This option is mostly only used by IT professionals.)

Now sign in to the computer with your account name and password. (If you have one set.) When you are finished troubleshooting, you can exit "Safe Mode" restarting your computer.
 

Similar threads