How to connect a powered JBL PSW-1000 subwoofer to a onkyo TX-NR585 receiver.

Dec 8, 2018
1
0
10
0
The Onkyo receiver has a RCA jack dedicated subwoofer connecter but the woofer has direct wires. What is best way to connect?
 
Subwoofer output of receiver to the left or right low level input on the sub. No reason to connect two cables.
You will need to set up the receiver so it knows you have a sub connected. You can do that with the set up mic or manually.
The receiver manual will tell you how.
 
Subwoofer output of receiver to the left or right low level input on the sub. No reason to connect two cables.
You will need to set up the receiver so it knows you have a sub connected. You can do that with the set up mic or manually.
The receiver manual will tell you how.
 
Thread starter Similar threads Forum Replies Date
J Audio 1
salmirabile Audio 1
D Audio 1
B Audio 5
H Audio 5
V Audio 1
D Audio 2
M Audio 1
D Audio 2
D Audio 1
F Audio 3
F Audio 2
N Audio 1
D Audio 12
Q Audio 1
E Audio 1
A Audio 1
D Audio 1
N Audio 2
D Audio 2

ASK THE COMMUNITY