installing a crossover

[ryanj19995]

Okay I im struggling a bit here in installing a crossover. I'm not sure what I'll need or whats right or wrong and that's why in posting here, asking the great community for their support.

Firstly, this is just a one time system being made and left.

Amps: 2x Ekho RX1200
Music source: Numark MP103

I've not got a crossover as of yet and that's why I'm here. I'm wanting to connect the crossover into the amp and music source so I can control both amps with the same crossover.

Is this possible? If so which way can it be connected and with what cables?

 

[kanewolf]

To be sure we are talking about the same thing -- my definition of crossover is a frequency splitter -- frequencies above a line go one way and below go another. Is that what you are trying to accomplish? You want to send high frequency signals to one amp and low frequency to the other? If that is the case, then you don't need 1200 watts for high frequency signals.

 

[ryanj19995]

The ekho amps were free. So I'd be using them, but yes, one amps for the lows and the others for the highs.

 

[kanewolf]

The ekho amps were free. So I'd be using them, but yes, one amps for the lows and the others for the highs.

This requires balanced inputs and outputs but it seems like what you would want.