laptop just give blankscreen when switched on ram and drive fine

Try this...

1. Turn the laptop off (not sleep or hibernate but off).
2. Connect an external monitor to the laptop.
3. Turn on the external monitor.
4. Turn on the laptop.

NOTE: You may have to press an "external monitor" button. Could be the f4 button or a button with two monitors on it, for the external monitor to work.

If you can see fine on the external monitor, then your attached display, or the ribbon cable that connects it, are your problem.

If you can't see on the external monitor at all, or the problem occurs on the external monitor as well, then it is probably the graphics card/GPU that is the problem, which may require the motherboard be replaced.
 
Try this...

1. Turn the laptop off (not sleep or hibernate but off).
2. Connect an external monitor to the laptop.
3. Turn on the external monitor.
4. Turn on the laptop.

NOTE: You may have to press an "external monitor" button. Could be the f4 button or a button with two monitors on it, for the external monitor to work.

If you can see fine on the external monitor, then your attached display, or the ribbon cable that connects it, are your problem.

If you can't see on the external monitor at all, or the problem occurs on the external monitor as well, then it is probably the graphics card/GPU that is the problem, which may require the motherboard be replaced.
 
Thread starter Similar threads Forum Replies Date
X Laptop Tech Support 0
E Laptop Tech Support 0
Beasttrick246 Laptop Tech Support 1
flameeagle71 Laptop Tech Support 0
M Laptop Tech Support 1
jubitu8 Laptop Tech Support 0
jondajaba Laptop Tech Support 3
B Laptop Tech Support 1
Pandofla Laptop Tech Support 2
B Laptop Tech Support 0
Toastbyte Laptop Tech Support 1
M Laptop Tech Support 0
Machir23 Laptop Tech Support 0
J Laptop Tech Support 0
pyrrhicx Laptop Tech Support 1
A Laptop Tech Support 2
T Laptop Tech Support 1
A Laptop Tech Support 8
3 Laptop Tech Support 1
K Laptop Tech Support 1

ASK THE COMMUNITY