Question Lenovo Ideapad 320 restarts without showing anything on the screen.

[burhangardezi]

I have Lenovo Ideapad320. It keeps restarting without showing anything on the screen. The screen remains black, Before it restarts the fan speeds up to maximum.
I have tried by removing the battery, changing the Hard drive and removing one of the ram.

This once happened earlier also, I didn't use it for a while and then tried to turn it on after few days and it turned on.

 

[webworkings]

NOTE: I know you said you never see anything on the screen, so I would try these before it can reboot itself (screen showing anything or not).

Note: If this problem started after an update (or system reinstall), please make sure the laptop is not connected to the internet in any way before you use the following instructions.

Try the following...

1. Power off the laptop.
2. Power on the laptop.
3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen.
5. Now you want to let the laptop boot to the "Automatic Repair" screen.
6. Click "Advanced Options" and then select "Troubleshoot".
7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system.
8. From here just follow the screen instructions until the recovery is completed.

NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost.

Do not do a "Reset" as that will wipe all data you have on the laptop.


Another version of this is the following...

1. Power off the laptop.
2. Power on the laptop.
3. When screen turns black, hit F10 and ALT repeatedly until the computer shuts off.
4. To fix the computer you should choose the second option listed.
5. When the next screen loads, choose the option "Reset Device".
6. Now choose which ever type of reset you wish.
7. Your computer should now restore itself to "Factory Settings".

NOTE: If you get a message saying "Error Resetting Device", then you should have the computer looked at by the manufacturer (if still under warranty) or by a tech.

If none of the above works, then either contact the manufacturer (if under warranty) or a local tech about a repair.