Solved! Lenovo yoga tab 3 stuck on boot screen read for more information

[najafyasir130]

My yoga tab 3 ytf x50f has had this problem since it received a system update.When i turned it on after the update it got stuck on the lenovo screen and turned on and off.I have tried hard reset and it gets stuck on performing the reset (i believe) its still red when the android system recovery come back.I don't know about safe mode but i have tried and seems to not be working. please help

 

[webworkings]

Here are the correct instructions for both getting into "Safe Mode" and doing a full "Hard Reset". Should both not work for you, and not let you into the system, then you may need to have the tablet looked at by either the manufacturer, if under warranty still, or by a local tech if not.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.


NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option.

6. When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

7. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

8. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

9. Then press the "Power" button to hard reset the tablet.

10. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.