Logo of asus on screen

[dineshjangra16]

Hi! I have an Asus E200HA running Windows 10 . Its a small laptop with only 32GB emmc out of ehicj only around 14 GB is available for use. It filled up too soon and I couldnt find out what was eating so much space so I decided to Reset it and delete all the data. Reset was stuck at 40% for a long time. I finally lost my patience and turned it off with the power button. Now when I turn it on, it is kind of stuck on a bootloop. The screen shows Asus logo, then a black screen, then the screen goes off and again screen turns on with the Asus logo and it repeats. Pleade give me any solutions. I already tried press F9 button after restart laptop but nothing happens. Thank you

 

[webworkings]

Note: If this problem started after an update (or system reinstall), please make sure the laptop is not connected to the internet in any way before you use the following instructions.

Try the following...

1. Power off the laptop.
2. Power on the laptop.
3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen.
5. Now you want to let the laptop boot to the "Automatic Repair" screen.
6. Click "Advanced Options" and then select "Troubleshoot".
7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system.
8. From here just follow the screen instructions until the recovery is completed.

NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost.

Do not do a "Reset" as that will wipe all data you have on the laptop.


Another version of this is the following...

1. Power off the laptop.
2. Power on the laptop.
3. When screen turns black, hit F10 and ALT repeatedly until the computer shuts off.
4. You shouTo fix the computer you should choose the second option listed.
5. When the next screen loads, choose the option "Reset Device".
6. Now choose which ever type of reset you wish.
7. Your coputer should now restore itself to "Factory Settings".

NOTE: If you get a message saying "Error Resetting Device", then you should have the computer looked at by the manufacturer (if still under warranty) or by a tech.