Output damage from game to led's!

lyger

Honorable
Jun 25, 2012
2
0
10,510
0
Is there any way to output damage from something in a game, like minecraft, getting shot with an arrow, creeper explosion, stuff like that, and output it to something which would be connected to an LED strip, and make it blink, or flicker with the damage you receive?
 

Lucias OKeefe

Honorable
Jun 18, 2013
22
0
10,590
5
I'm sure there is. Minecraft is written in Java so there is code reflecting damage.

There is a version of Minecraft made for the Raspberry pi that is designed around custom programming. That would be much easier to do.

Computers such as the Arduino and Pi are capable of interacting with the real world via digital programming easily however, without knowledge of coding your ability to do so will be limited.
 

Lucias OKeefe

Honorable
Jun 18, 2013
22
0
10,590
5
I'm sure there is. Minecraft is written in Java so there is code reflecting damage.

There is a version of Minecraft made for the Raspberry pi that is designed around custom programming. That would be much easier to do.

Computers such as the Arduino and Pi are capable of interacting with the real world via digital programming easily however, without knowledge of coding your ability to do so will be limited.
 
Thread starter Similar threads Forum Replies Date
G Streaming Video & TVs 0
S Streaming Video & TVs 1
J Streaming Video & TVs 1
BUBBYKONG Streaming Video & TVs 0
faundoo Streaming Video & TVs 0
blue_duck Streaming Video & TVs 6
C Streaming Video & TVs 5
alphacoyle Streaming Video & TVs 3
rad07 Streaming Video & TVs 2
Mahan2210 Streaming Video & TVs 6
Pdbonlucas Streaming Video & TVs 3
D Streaming Video & TVs 1
hiAnsh Streaming Video & TVs 1
Gimibihi Streaming Video & TVs 1
G Streaming Video & TVs 1
Fluffy4000 Streaming Video & TVs 2
J Streaming Video & TVs 1
Jongwell Streaming Video & TVs 5
reble Streaming Video & TVs 3
J Streaming Video & TVs 4
Similar threads
Question Tv coaxial digital audio output low sound volume(SOLVED)
Question ARC output stopped working after Nintendo Switch turned on - Samsung TV and Yamaha receiver model included
Solved! Second screen for TV?
Question Onkyo TX-NR646 Only outputting YCBCR420 10b TM
Question Can I connect the outputs of two HDMI switches together to make a matrix?
Solved! My projector only shows green when an HDMI output is connected to the projector's VGA input
Solved! OTA Audio with No Output On TV
Solved! Would I get better audio quality running my htpc thru a hdmi to hdmi+optical output vs the 3.5mm jack to av rca inputs on receiver like I'm doing now?
Question Get TV output from a local TV channel 998 showing Lobby camera of a condominium building and stream it to iOS SIP/VOIP application
Solved! UNSUPPORTED SIGNAL.CHECK FOR DEVICE OUTPUT HDMI connection problem
Solved! Modern TV's with Video Output?
Solved! Converting HDMI Output to Optical DVD input
Solved! HDMI Switcher output resolution changes to 1920 thereby cutting off audio
Solved! My Logitch Z506 aren't outputing sound to the rear speaker
Solved! How do I get audio output from an Optoma gt1080darbee with an AppleTV?
Solved! Problems getting new Blu Ray player to output to receiver
Solved! Best setup for Wireless HDMI + HDMI Switch (2 Inputs -> 2 Outputs)
Solved! Low optical output from LG TV -> JBL SB450 results in short mute
Solved! re: hum on the output of the vcr/dvd sys
3 input 3 output splitter combination - is there a risk of damage to devices?

ASK THE COMMUNITY