Question about network access?

G

Guest

Guest
Archived from groups: microsoft.public.pocketpc (More info?)

I have an ipaq h2200 which I want to connect to the
internet with Bluetooth. My desktop has a Bluetooth
adapter and I can connect to the ipaq, no problem.
The problem is that my desktop is actually sharing
an internet connection with another desktop, so I can't
actually enable the ics on the Bluetooth because you
can't share the internet connection twice,as only one
computer can have 192.168.0.1. My question is
simply if there is a way to do it, to "tell" the Bluetooth
adapter that "the internet in at the other adapter, the
Ethernet one" . Here is my 'ipconfig' output if it is of
any assistance

Ethernet adapter Bluetooth Network:

Connection-specific DNS Suffix . :
Autoconfiguration IP Address. . . : 169.254.143.8
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Autoconfiguration IP Address. . . : 192.168.44.21
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.121
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

(you can ignore the Ethernet adapter Local Area Connection 2:
adapter, it's just my Hauppauge satellite card)
 
G

Guest

Guest
Archived from groups: microsoft.public.pocketpc (More info?)

The simplest way is to connect the PPC to the desktop via a BT Activesync
session. Then passthrough works just as if it were in the cradle. That
assumes that the PC you normally sync with is also the one with BT.

--
Sven, MS-MVP Mobile Devices
"Missoni" <tettyut> wrote in message
news:%23q2XD1YrEHA.2008@TK2MSFTNGP12.phx.gbl...
> I have an ipaq h2200 which I want to connect to the
> internet with Bluetooth. My desktop has a Bluetooth
> adapter and I can connect to the ipaq, no problem.
> The problem is that my desktop is actually sharing
> an internet connection with another desktop, so I can't
> actually enable the ics on the Bluetooth because you
> can't share the internet connection twice,as only one
> computer can have 192.168.0.1. My question is
> simply if there is a way to do it, to "tell" the Bluetooth
> adapter that "the internet in at the other adapter, the
> Ethernet one" . Here is my 'ipconfig' output if it is of
> any assistance
>
> Ethernet adapter Bluetooth Network:
>
> Connection-specific DNS Suffix . :
> Autoconfiguration IP Address. . . : 169.254.143.8
> Subnet Mask . . . . . . . . . . . : 255.255.0.0
> Default Gateway . . . . . . . . . :
>
> Ethernet adapter Local Area Connection 2:
>
> Connection-specific DNS Suffix . :
> Autoconfiguration IP Address. . . : 192.168.44.21
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . :
>
> Ethernet adapter Local Area Connection:
>
> Connection-specific DNS Suffix . :
> IP Address. . . . . . . . . . . . : 192.168.0.121
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 192.168.0.1
>
> (you can ignore the Ethernet adapter Local Area Connection 2:
> adapter, it's just my Hauppauge satellite card)
 
G

Guest

Guest
Archived from groups: microsoft.public.pocketpc (More info?)

Hi,
I don't know what's wrong with my Bluetooth software
(I have Newlink, is this considered less good than
Belkin, Netgear?) but the serial connection doesn't
work. Going back to my original question, is there
a command I can issue to my desktop to add the
default gateway to the Bluetooth adapter, or does
ICS disallow this?


"Sven, MVP-Mobile Devices" <sejohannsen@hotmail.com> wrote in message
news:Or1bYuZrEHA.3488@TK2MSFTNGP11.phx.gbl...
> The simplest way is to connect the PPC to the desktop via a BT Activesync
> session. Then passthrough works just as if it were in the cradle. That
> assumes that the PC you normally sync with is also the one with BT.
>
> --
> Sven, MS-MVP Mobile Devices
> "Missoni" <tettyut> wrote in message
> news:%23q2XD1YrEHA.2008@TK2MSFTNGP12.phx.gbl...
> > I have an ipaq h2200 which I want to connect to the
> > internet with Bluetooth. My desktop has a Bluetooth
> > adapter and I can connect to the ipaq, no problem.
> > The problem is that my desktop is actually sharing
> > an internet connection with another desktop, so I can't
> > actually enable the ics on the Bluetooth because you
> > can't share the internet connection twice,as only one
> > computer can have 192.168.0.1. My question is
> > simply if there is a way to do it, to "tell" the Bluetooth
> > adapter that "the internet in at the other adapter, the
> > Ethernet one" . Here is my 'ipconfig' output if it is of
> > any assistance
> >
> > Ethernet adapter Bluetooth Network:
> >
> > Connection-specific DNS Suffix . :
> > Autoconfiguration IP Address. . . : 169.254.143.8
> > Subnet Mask . . . . . . . . . . . : 255.255.0.0
> > Default Gateway . . . . . . . . . :
> >
> > Ethernet adapter Local Area Connection 2:
> >
> > Connection-specific DNS Suffix . :
> > Autoconfiguration IP Address. . . : 192.168.44.21
> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > Default Gateway . . . . . . . . . :
> >
> > Ethernet adapter Local Area Connection:
> >
> > Connection-specific DNS Suffix . :
> > IP Address. . . . . . . . . . . . : 192.168.0.121
> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > Default Gateway . . . . . . . . . : 192.168.0.1
> >
> > (you can ignore the Ethernet adapter Local Area Connection 2:
> > adapter, it's just my Hauppauge satellite card)
>
>
 

ASK THE COMMUNITY